Filter
Top Products
236
Connecting the CX-Programmer Section 8-2
Connecting through the USB port with a USB-Serial Conversion Cable
Connecting to the Peripheral Port
Cable Connection Diagram
Using a CS1W-CN226/626
Cable
Using an RS-232C Cable
(XW2Z-200S-CV, XW2Z-
500S-CV, XW2Z-200S-V, or
XW2Z-500S-V)
Note The connection must be a Host Link connection.
CS1W-CIF31
USB type A plug, male
Peripheral port
D-sub Connector
(9-pin male)
D-sub Connector
(9-pin female)
CS/CJ-series peripheral connector
Recommended cable:
CS1W-CN226/626
CS1W-CN118
CS1W-CIF31
Peripheral port
USB type A plug, male
D-sub Connector
(9-pin male)
D-sub Connector
(9-pin female)
XW2Z-200S-CV, XW2Z-500S-CV,
XW2Z-200S-V, or XW2Z-500S-V
(See note.)
D-sub Connector
(9-pin male)
D-sub Connector
(9-pin female)