Filter
Top Products
84
Reference Manual
00809-0100-4860, Rev BC
Section 5: Troubleshooting
January 2013
Troubleshooting
Detach the meter adapter
The above instructions will provide access to the meter body. Use the following steps if it is
necessary to remove the coaxial cable:
1. Loosen and remove the two screws that hold the union onto the meter adapter and pull
the union away from the adapter.
2. Loosen and remove the sensor cable nut from the other end
of the union.
3. Loosen and disconnect the conduit adapter or cable gland from the
meter adapter.
Figure 5-10. Coaxial Cable Connections
Coaxial Cable
Meter Adapter
Union
Washer
Nut
Sensor Cable Nut
Meter Body
bracket
½ NPT Conduit Adapter or
Cable Gland (Supplied by