Filter
Top Products
31
Reference Manual
00809-0100-4860, Rev BC
Section 3: Configuration
January 2013
Configuration
Standard/Normal flow units
StdCuft/min
SCFH
NCMM
NmlCum/h
NCMD
Note
When configuring Standard or Normal Flow units to the volumetric flow, a density ratio must be
provided. See the Density/Density Ratio on page 39.
Special units
Special Units allows you to create flow rate units that are not among the standard options. They
can be volumetric only. Configuration of a special unit involves entry of these values: base
volume unit, base time unit, user defined unit and conversion number. Suppose you want the
Barrels per day BBL/D bbl/d
Imperial Gallons per second IGAL/S Impgal/s
Imperial Gallons per minute IGAL/M Impgal/min
Imperial Gallons per hour IGAL/H Impgal/h
Imperial Gallons per day IGAL/D Impgal/d
Liters per second L/S L/s
Liters per minute L/MIN L/min
Liters per hour L/H L/h
Liters per day L/D L/D
Actual Cubic Meters per
second
ACMS ACMS
Actual Cubic Meters per
minute
ACMM ACMM
Actual Cubic Meters per hour ACMH ACMH
Actual Cubic Meters per day ACMD ACMD
Million Actual Cubic Meters per
day
MACMD MACMD
Normal Cubic Meters per
minute
NCMM
Normal Cubic Meters per hour NCMH
Normal Cubic Meters per day NCMD
Field Comm. 1, 1, 4, 1, 3