Filter
Top Products
59
Reference Manual
00809-0100-4860, Rev BC
Section 4: Operation
January 2013
Operation
Burst option
Burst Option enables you to select the variables to broadcast over the burst transmitter. Choose
one of the following options:
PV–Selects the process variable for broadcast over the burst transmitter.
Percent Range/Current–Selects the process variable as percent of range and analog output
variables for broadcast over the burst transmitter.
Process vars/crnt–Selects the process variables and analog output variables for broadcast over
the burst transmitter.
Dynamic Vars–Burst all dynamic variables in the transmitter.
Xmtr Vars–Allows the user to define custom burst variables. Select variables from the list below:
Burst XMTR vars
Allows users to select and define Burst Variables.
XMTR variable slot 1
User selected Burst Variable 1.
XMTR variable slot 2
User selected Burst Variable 2.
XMTR variable slot 3
User selected Burst Variable 3.
Field Comm. 1, 4, 2, 3, 5
Volume Flow
Velocity Flow
Mass Flow
Vortex Frequency
Pulse Output Frequency
Totalizer Value
Process Temperature (MTA Option Only)
Calculated Process Density (MTA Option Only)
Cold Junction Temperature (MTA Option Only)
Electronics Temperature
Field Comm. 1, 4, 2, 3, 6
Field Comm. 1, 4, 2, 3, 6, 1
Field Comm. 1, 4, 2, 3, 6, 2
Field Comm. 1, 4, 2, 3, 6, 3