Filter
Top Products
34
Reference Manual
00809-0100-4860, Rev BC
Section 3: Configuration
January 2013
Configuration
Velocity flow
Displays the current velocity flow value and units.
Velocity units
Allows the user to select the velocity units from the available list.
Velocity measured base
Velocity Measured Base will determine if the velocity measurement is based on the mating pipe
ID or the meter body ID.
Totalizer
Totalizer — Totalizer tallies the total amount of liquid or gas that has passed through the
flowmeter since the totalizer was last reset.
It enables you to change the settings of the totalizer.
Total
Total — Provides the output reading of the totalizer. Its value is the amount of liquid or gas that
has passed through the flowmeter since the totalizer was last reset.
Start
Start — Starts the totalizer counting from its current value.
Stop
Stop — Interrupts the totalizer count until it is restarted again. This feature is often used during
pipe cleaning or other maintenance operations.
Reset
Reset — Returns the totalizer value to zero. If the totalizer was running, it will continue to run
starting at zero.
Field Comm. 1, 1, 4, 3, 1
Field Comm. 1, 1, 4, 3, 2
ft/s
m/s
Field Comm. 1, 1, 4, 3, 3
Field Comm. 1, 1, 4, 4
Field Comm. 1, 1, 4, 4, 1
Field Comm. 1, 1, 4, 4, 2
Field Comm. 1, 1, 4, 4, 3
Field Comm. 1, 1, 4, 4, 4