A SERVICE OF

logo

2-13
User Guide for Cisco Security Manager 4.4
OL-28826-01
Chapter 2 Preparing Devices for Management
Initializing IPS Devices
Web server port
Use default ports
You configure these settings through the setup command in Intrusion Prevention System Device
Manager (IDM) or in a command-line session, depending upon which platform is used by your IPS
device. For a list of supported IPS platforms, see the supported devices and software versions
information at the following URL:
http://www.cisco.com/en/US/products/ps6498/products_device_support_tables_list.html.
For detailed information on these settings, refer to the technical documentation for your IPS device.
Note For information on preparing an IOS IPS device for use, see Initial Preparation of a Cisco IOS IPS
Router, page 44-5.