Chapter 3 - Robot Installation
36 AdeptSix 300CR Robot Instruction Handbook, Rev. A
Using the Forklift
When using a forklift, the robot should be fixed on a pallet with its shipping bracket and
jig, as shown in Figure 3-2. Insert the forklift blades under the pallet and lift it. The pallet
must be strong enough to support the robot. Transportation of the robot must be
performed slowly in order to avoid overturning, slippage, or damage.
Figure 3-2. Using the Forklift
When using the forklift, note the following:
• Check that the eyebolts are securely fastened.
• Use a wire sling that is strong enough to withstand the weight. (The weight of the
robot is approximately 35 kg, including the shipping bracket and jig.)
• Attached eyebolts are designed to support the robot’s weight. Do not use them for
anything other than transporting the robot.
• Mount the shipping bracket and jig for transporting the robot.
• Avoid exerting force on the arm or motor unit when transporting. Exercise caution
when using transporting equipment other than a crane or forklift, as injury may
occur.
4 x M10 Bolts
Pallet
Forklift Blade Entry
