Filter
Top Products
Administration Guide 79
Using RSA SecurID for Authentication
Host
Host name or IP address of your LDAP server.
Port
Defaults to 389.
Base DN
You can leave this field blank. (The information provided by the LDAP Browser will help you
determine the Base DN needed for the Authentication tab.)
Anonymous Bind
Select the check box if the LDAP server does not require credentials to connect to it. If the LDAP
server requires credentials, leave the check box cleared, click Next, and enter the credentials.
4Click Finish.
The LDAP Browser displays the profile name that you just created in the left pane of the LDAP Browser window and
connects to the LDAP server.
To look up LDAP attributes
1 In the left pane of the LDAP Browser, select the profile name that you created.
2 To look up the Base DN, in the right pane, locate the namingContexts attribute. The value of that
attribute is the Base DN for your site. The Base DN is typically dc=myDomain,dc=com (if your
directory tree is based on Internet domain names) or ou=domain,o=myOrg,c=country.
3 Navigate through the browser to locate other attributes.
Using RSA SecurID for Authentication
If your site uses an RSA ACE/Server and SecurID for authentication, you can configure the Firebox SSL
VPN Gateway to authenticate user access with the
RSA ACE/Server. The Firebox SSL VPN Gateway acts as an RSA Agent Host, authenticating on behalf of
the users who use Secure Access to log on. The Firebox SSL VPN Gateway supports the use of one RSA
ACE/Server.