Filter
Top Products
Using the Firebox SSL VPN Gateway
24 Firebox SSL VPN Gateway
For information about the relationship between the Default Gateway and dynamic or static routing,
see “Dynamic and Static Routing” on page 51.
After you configure your network settings on the Firebox SSL VPN Gateway, you need to restart the
appliance.
Note
Note: You do not need to restart the Firebox SSL VPN Gateway until you complete all configuration
steps.These include configuring network access for the appliance and installing certificates and licenses.
For more information about configuring additional network settings, see“Configuring Firebox SSL VPN
Gateway Network Connections” on page 47.
Redirecting Connections on Port 80 to a Secure Port
By default, the Firebox SSL VPN Gateway does not accept unsecure connections on port 80. If a user
attempts to connect to the Firebox SSL VPN Gateway using HTTP on port 80, the connection attempt
fails.
You can configure the Firebox SSL VPN Gateway to automatically redirect HTTP connection attempts on
port 80 to be secure connections on port 443 (or other secure port).
If a user attempts an unsecure connection on port 80, the Firebox SSL VPN Gateway automatically con-
verts this connection attempt into a secure (SSL-encrypted) connection on port 443.
To redirect unsecure connections
1Click the Firebox SSL VPN Gateway Cluster tab and open the window for the Firebox SSL VPN
Gateway.
2Click the General Networking tab.
3Click the Advanced button.
4Click Redirect any requests for port 80 to a secure port.
5Click OK.
Note
Note: If you use the default setting of Do not accept connections on port 80, all user connection
attempts on port 80 fail and there is no attempt to redirect them to port 443.
Using the Firebox SSL VPN Gateway
The Firebox SSL VPN Gateway performs the following functions:
• Authentication
• Termination of encrypted sessions
• Access control (based on permissions)
• Data traffic relay (when the first three functions are met)
The Firebox SSL VPN Gateway operates as follows:
• A remote user downloads the Secure Access Client by connecting to a secure Web address and
providing authentication credentials.