Filter
Top Products
Administration Guide 139
Enabling and Viewing SNMP Logs
To view or download the log, go to the Logging > Configuration tab and click Download W3C Log.
Enabling and Viewing SNMP Logs
When Simple Network Management Protocol (SNMP) is enabled, the Firebox SSL VPN Gateway reports
the MIB-II system group (1.3.6.1.2.1). The Firebox SSL VPN Gateway does not support Firebox SSL VPN
Gateway-specific SNMP data.
You can view SNMP messages in the Administration Tool and you can configure an SNMP monitoring
tool such as the Multi Router Traffic Grapher to provide a visual representation of the SNMP data
reported by the Firebox SSL VPN Gateway in response to queries. For a sample of Traffic Grapher output,
see “Multi Router Traffic Grapher Example” on page 139.
To enable logging of SNMP messages
1Click the VPN Gateway Cluster tab and then click the Logging/Settings tab.
2Under SNMP Settings, select Enable SNMP.
3In SNMP Location, type the SNMP location. This field is informational only.
4In SNMP Contact, type the contact. This field is informational only.
5In Community, type the community. This field is informational only.
6In Port, type the port.
7Click Submit.
Multi Router Traffic Grapher Example
The Multi Router Traffic Grapher is a tool used to monitor SNMP data, such as traffic load. Multi Router
Traffic Grapher generates HTML pages containing PNG images that provide a visual representation of
the traffic. Multi Router Traffic Grapher works under UNIX, Windows 2000 Server, and Windows Server
2003.
Note
The information in this section provides a general overview of working with Multi Router Traffic
Grapher. For information about obtaining and using this tool, visit the Multi Router Traffic Grapher Web
site at
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/
.
sc-status The Firebox SSL VPN Gateway-to-client request status code. For a description of status
codes, refer to http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html.
cs-uri The client-to-Firebox SSL VPN Gateway request URI.
sc-uri The Firebox SSL VPN Gateway-to-client request URI.
Field Description