Filter
Top Products
Client Certificates
114 Firebox SSL VPN Gateway
Note
Note: HyperTerminal is not installed automatically on Windows 2000 Server or Windows Server 2003. To
install HyperTerminal, use Add/Remove Programs in Control Panel.
3 Set the serial connection to 9600 bits per second, 8 data bits, no parity, 1 stop bit. Hardware flow
control is optional.
4 Turn on the Firebox SSL VPN Gateway. The serial console appears on the computer terminal after
about three minutes.
5 If using HyperTerminal, press the Enter key.
6 To reset the default certificate, type 5 and press Enter.
Client Certificates
If you want additional authentication, you can configure the Firebox SSL VPN Gateway to require client
certificates for authentication.
The Firebox SSL VPN Gateway can authenticate a client certificate that is stored in either of these loca-
tions:
•
In the certificate store of the Windows operating system on a client computer. In this case, the client
certificate is installed separately in the certificate store using the Microsoft Management Console.
• In a smart card or a hardware token. In this case, the certificate is embedded within the smart card and
read from a smart card reader attached to the network.
Note
Note: The Firebox SSL VPN Gateway is configured in the same way regardless of whether the certificates
are stored in the Windows operating system or on a smart card. No special
If clients are connecting using kiosk mode or from a Linux computer, client side certificates are not sup-
ported. If client certificates are enabled in the Firebox SSL VPN Gateway, Linux Clients and kiosk mode
do not work.
If a client certificate is required, it must be provided by the network administrator. The certificate is
installed separately into the certificate store using the Microsoft Management Console. When this
requirement is enforced, every computer that logs on through the Firebox SSL VPN Gateway must have
an SSL client certificate that is in P12 format.
To require client certificates
1Click the Global Cluster Policies tab.
2Under Select security Options, select Require secure client certificates.
3Click Submit.
Note
Connections using ICA or session reliability do not support client certificates. When client certificates
are enabled, the Firebox SSL VPN Gateway accepts only secure connections from applications that can
present the client certificate.