Filter
Top Products
Administration Guide 29
Using the Firebox SSL VPN Gateway
public address. The external public address ensures that the redirected client returns to the
Firebox SSL VPN Gateway it first encountered, providing session stickiness. The association
between a particular request and the Firebox SSL VPN Gateway is broken only when the client
makes a new connection. To configure the Firebox SSL VPN Gateway to connect to the network,
see “Configuring Network Information” on page 47.
To establish the physical connection, connect the Firebox SSL VPN Gateway eth0 interface to the inter-
nal network. Use the Firebox SSL VPN Gateway Administration Tool to configure network settings. Spec-
ify the IP address of the server load balancer as the default gateway on the Firebox SSL VPN Gateway
VPN Gateway Cluster > General Networking tab.
Note
SSL sessions must terminate at the Firebox SSL VPN Gateway. In-line SSL acceleration hardware
appliances and bridging proxy servers cannot be used.