Filter
Top Products
Administration Guide 171
Scenario 2: Creating Guest Accounts Using the Local Users List
To create a guest authentication realm for the guest users
1 In the Firebox SSL VPN Gateway Administration Tool, click the Authentication tab.
2 In Realm Name, type Guest.
3 Select One Source and click Add.
4 At Select Authentication Type, select Local authentication only and then click OK.
5 From the Authorization tab, select No authorization.
6 Click Submit.
Creating Local Users
Creating local users is the second of three procedures the administrator performs in the scenario for cre-
ating guest accounts using the Local Users list.
In this procedure, the administrator creates local user accounts for Silvio Branco and Lisa Marth on the
Firebox SSL VPN Gateway and provides each user with a password.
To add the local users
1 Click the Access Policy Manager tab.
2 Right-click Local Users and select New User.
3 In User Name, type Lisa Marth.
4 In the Password and Verify Password fields, enter a password for Lisa Marth and click OK.
5 Repeat Steps 2 through 4 for to create a local user account for Silvio Branco.
Creating and Assigning a Network Resource to the Default User Group
Creating and assigning a network resource to the Default user group is the last of three procedures in
the scenario for creating guest accounts using the Local Users list.
In this step, the administrator creates a network resource that specifies only the Web conference server
and then assigns this resource to the Default user group.
1 From the right pane of the Access Policy Manager tab in the Administration Tool, create a new
network resource named "Guest Resource." Specify only the IP address of the Web conference server
when creating this network resource (for example 10.10.50.60/32).
2 In the left pane, expand the "Default" user group.
3 Drag the "Guest Resource" network resource from the right pane of the Access Policy Manager tab
to the Network Policies of the "Default" group in the left pane.
Note
If a user logs on and cannot get group information, the user will always use the Default group settings.
When this procedure is complete, the administrator has accomplished the following:
• Silvio Branco and Lisa Marth can enter the user credential "Guest\Silvio Branco" or "Guest\Lisa
Marth" to authenticate to the Guest realm on the Firebox SSL VPN Gateway. Silvio and Lisa must
include the realm name as part of their user name credential when authenticating because they
authenticate to a realm that is not the Default authentication realm.
• Silvio and Lisa also use the passwords that the administrator specified for them to authenticate to
the Firebox SSL VPN Gateway. The administrator entered these passwords when creating Silvio
and Lisa as local users on the Firebox SSL VPN Gateway.