Toshiba HFC R-410A Air Conditioner User Manual


 
56
Indoor units
Concealed chassis units
Model MML-AP 0071BH 0091BH 0121BH 0151BH 0181BH 0241BH
Cooling capacity* kW 2.2 2.8 3.6 4.5 5.6 7.1
Heating capacity kW 2.5 3.2 4.0 5.0 6.3 8.0
Electrical data
Power supply V-ph-Hz 230-1-50 (voltage range 220-240 V) - power supply to indoor unit only
Operating current A 0.25 0.25 0.25 0.45 0.45 0.46
Power input kW 0.056 0.056 0.056 0.090 0.090 0.095
Power factor % 97 97 97 87 87 90
Starting current A 0.60 0.60 0.60 0.80 0.80 1.00
Unit appearance Zinc hot dipping steel plate
Unit dimensions
Height mm 600 600 600 600 600 600
Width mm 745 745 745 1045 1045 1045
Depth mm 220 220 220 220 220 220
Unit weight kg 21 21 21 29 29 29
Heat exchanger Finned tube
Sound proofing/heat insulating material Non-flammable insulation
Fan type Centrifugal fan
Fan motor power input W 19 19 19 70 70 70
Air flow
High l/s 128 128 128 206 206 264
Medium l/s 111 111 111 167 167 220
Low l/s 83 83 83 136 136 178
Air flow
High m
3
/h 460 460 460 740 740 950
Medium m
3
/h 400 400 400 600 600 790
Low m
3
/h 300 300 300 490 490 640
Static pressure kPa 0 0 0 0 0 0
Sound power level (high/medium/low) dB(A) 49/47/45 49/47/45 49/47/45 49/47/45 49/47/45 55/50/46
Sound pressure level (high/medium/low)** dB(A) 36/34/32 36/34/32 36/34/32 36/34/32 36/34/32 42/37/33
Air filter Standard single filter supplied
Controller Remote controller
Connection pipes
Gas connection diameter in 3/8 3/8 3/8 1/2 1/2 5/8
Liquid connection diameter in 1/4 1/4 1/4 1/4 1/4 3/8
Drain connection, nom. dia.*** in 3/4 3/4 3/4 3/4 3/4 3/4
Rated conditions: Cooling: Indoor air temperature 27°C db/19°C wb, outdoor air temperature 35°C db
Heating: Indoor air temperature 20°C db, outdoor air temperature 7°C db/6°C wb
* Cooling capacities and electrical data are measured at the conditions specified by JIS B 8615, based on the reference piping which consists of 5 m of main
piping and 2.5 m of branch piping connected with 0 metre height.
** The sound pressure level is measured in an anechoic chamber in accordance with JIS B 8616. Normally the values measured in the actual operating
environment become larger than the indicated values due to the effects of external sound.
*** Male screw connection one side.