Filter
Top Products
52
Indoor units
Ceiling-suspended units
Model MMC-AP 0151H 0181H 0241H 0271H 0361H 0481H
Cooling capacity* kW 4.5 5.6 7.1 8.0 11.2 14.0
Heating capacity kW 5.0 6.3 8.0 9.0 12.5 16.0
Electrical data
Power supply V-ph-Hz 230-1-50 (voltage range 220-240 V) - power supply to indoor unit only
Operating current A 0.29 0.32 0.42 0.42 0.78 0.84
Power input kW 0.033 0.038 0.050 0.050 0.091 0.110
Starting current A 0.43 0.48 0.62 0.62 1.17 1.25
Unit appearance White (Munsell 10Y 9.3/0.4)
Unit dimensions
Height mm 210 210 210 210 210 210
Width mm 910 910 1180 1180 1595 1595
Depth mm 680 680 680 680 680 680
Unit weight kg 22 22 26 26 34 34
Heat exchanger Finned tube
Sound proofing/heat insulating material Non-flammable insulation
Fan type Centrifugal fan
Fan motor power input W 30 30 40 40 80 80
Air flow
High l/s 200 217 308 308 458 500
Medium l/s 167 183 250 250 383 433
Low l/s 150 150 233 233 333 367
Air flow
High m
3
/h 720 780 1110 1110 1650 1800
Medium m
3
/h 600 660 900 900 1380 1560
Low m
3
/h 540 540 840 840 1200 1320
Sound power level (high/medium/low) dB(A) 48/45/43 49/46/43 51/49/46 51/49/46 54/51/48 56/53/50
Sound pressure level (high/medium/low)** dB(A) 35/32/30 36/33/30 38/36/33 38/36/33 41/38/35 43/40/37
Air filter Standard long-life filter supplied
Controller Remote controller
Room thermostat Supplied
Connection pipes
Gas connection diameter in 1/2 1/2 5/8 5/8 5/8 5/8
Liquid connection diameter in 1/4 1/4 3/8 3/8 3/8 3/8
Drain connection, nom. dia (polyvinyl tube) in 3/4 3/4 3/4 3/4 3/4 3/4
Rated conditions: Cooling: Indoor air temperature 27°C db/19°C wb, outdoor air temperature 35°C db
Heating: Indoor air temperature 20°C db, outdoor air temperature 7°C db/6°C wb
* Cooling capacities and electrical data are measured at the conditions specified by JIS B 8615, based on the reference piping which consists of 5 m of main
piping and 2.5 m of branch piping connected with 0 metre height.
** The sound pressure level is measured in an anechoic chamber in accordance with JIS B 8616. Normally the values measured in the actual operating
environment become larger than the indicated values due to the effects of external sound.