Filter
Top Products
22
Heating capacity calculation method:
Required heating capacity = heating capacity x factor (, , , ,
*1
,
*2
) kW
Indoor air dry bulb temperature vs. capacity correction value
Indoor air dry bulb temperature (°C)
Outdoor air wet bulb temperature vs. capacity correction value
Air flow variation ratio of indoor unit vs. capacity correction (for ducted units only)
Outdoor air wet bulb temperature (°C)
Air flow variation ratio (%)
*1 Outdoor unit capacity correction factor when total capacity of the indoor units is not equal to the outdoor unit capacity.
*2 Refer to the capacity correction for frosting on the outdoor heat exchanger section on page 24.
Capacity correction value
Capacity correction value
Capacity correction value