Filter
Top Products
Chapter 5 Voice Mail Servers 65
SIP Provisioning Client User Guide
[Standard - Nortel Networks Confidential]
5 Enter general information about the Line-based voice mail server in the
parameter fields. The following table lists the Line-based parameter
information.
6 Click Next to provision the lines for the gateway (Figure 41).
Table 11 Line-based voice mail server general parameter information
Parameter Type Range Default Description
Description String(100) Up to 100
characters
None The description for the server that
identifies the Line-based voice
mail server.
Client contact String(100) Up to 100
characters
Voice mail The field used to route voice mail.
In most cases, you will use the
default (voice mail). If you require
a different client contact, contact
your Nortel Networks support
representative.
Application Server String(60) Up to 60
characters
ServerHome. With
this default, each SIP
Application Module
will ignore this field
and forward SIP
requests to the voice
mail server instead of
forwarding them to a
"home" Application
Server.
Specifies the SIP Application
Module will host the voice mail
server being provisioned. This is
used in an N+M environment. All
SIP Application Modules that are
not the home SIP Application
Module will forward requests
destined to voice mail to the
address specified in this field.
Maximum Call
Duration
Digit 1-99 None The period of time that the SIP
Application Module allows a
caller to stay connected to the
Line-based voice mail server
when someone is trying to leave
a voice mail message.
Domain name String(60) Up to 60
characters
None The domains that will use this
voice mail server. Use the
Ctrl-click key to select multiple
domains to use the same voice
mail server.