Filter
Top Products
60 Chapter 5 Voice Mail Servers
NN10043-113
[Standard - Nortel Networks Confidential]
6 Click Save. The Trunk-based voice mail server you added now appears in the
list of voice mail servers (Figure 37).
Figure 37 Voice Mail Servers window (Trunk-based)
Provisioning a Line-based voice mail server
Provisioning a Line-based voice mail server allows the administrator to configure
the application so that it can communicate with a voice mail server using a Lines
Gateway. The SIP Application Module is given information on which Lines
Gateway to use and which line numbers to use for sending calls to the gateway
when routing a call to voice mail.
In addition, an SMDI TELNET session is configured to allow the SIP Application
Module to directly communicate call setup information to the voice mail server.
The SMDI link is also used by the SIP Application Module to receive SMDI MWI
messages.
Application
Server
String(60) Up to 60
characters
ServerHome. With
this default, each SIP
Application Module
will ignore this field
and forward SIP
requests to the voice
mail server instead of
forwarding them to a
"home" Application
Server.
Specifies the SIP Application
Module will host the voice mail
server being provisioned. This is
used in an N+M environment. All
SIP Application Modules that are
not the home SIP Application
Module will forward requests
destined to voice mail to the
address specified in this field.
Domain name String(60) Up to 60
characters
None The domains that will use this
Trunk-based voice mail server.Use
the Ctrl-click key to select multiple
domainstousethesamevoicemail
server.
Table 9 PRI Gateway connection parameters
Parameter Type Range Default Description