Filter
Top Products
35
3) Select the Kind, Type, and Model Name.
Select the Model Name of the unit you want to set from Kind, Type, Class, and Model Name. (Kind:
IC, LC, FU, OC, BC, OS) The Model Name appears at Model Name candidate.
4) Click the [Set] button.
When the [Set] button is clicked, the Model Name is reflected as a selected unit Model Name
candidate.
Removing a Model Name
[Procedure]
1) Select the unit to be removed.
Click the unit whose Model Name you wish to
remove. The cell is displayed
in cyan, and becomes the Model Name setting
objective. Multiple units can be selected.
2) Click the [Delete] button.
Click the [Delete] button. The Model Name of the
selected unit is deleted.
Frequency setting
[Procedure]
1) Select the frequency.
When the power line frequency is 50Hz, deselect
Use 60Hz. (default)
Select Use 60 Hz only when using 60Hz power.
Ending unit Model Name setup
[Procedure]
1) Select the [OK] button.
After fully completing the type name setting of the G-50A unit, click the [OK] button on the setting screen.
*When the [Cancel] button is clicked, this setting is terminated to return to the initial window.
8.7.3 Set-up of the number of floors, and floor name (Step 2)
Follow these steps to set the number of floors being managed (floor count) and floor names.
Set the number of floors and floor names.
[Procedure]
1) Click the “
/
” button to select the number of
floors
Clicking “
/
” button selects the number of floors.
2) Click in the Floor name cell. Enter a name for each
floor.
Click the floor name cell to be set. The cell is now
ready to receive text.
Now enter the name of the floor. Do this for each
floor.
3) Click [OK] button.
When finished with these settings, click the [OK]
button.
* When the [Cancel] button is clicked, this setting
is terminated to return to the initial screen.
Note:
• The minimum number of floors is 1, the maximum is 55.
• Floor names can be a maximum of 16 characters. (Duplicate settings
are possible.)
Note:
• The Model Name can be manually entered at Model Name candidate.
• The KIC type is not a database. Enter it manually.
• A remote controller or system controller Model Name cannot be set.
•
When the charge function was used and the Model Name was changed, check the charge
setting set contents. The capacity value of each unit is changed.
Frequency check box
Delete button
Set-up of the number of floors, and f
loor
name screen
Floor name
Floor number