Filter
Top Products
33
Change the group No.
[Procedure]
1) Select the cell of the group No. displayed.
Click the cell desired to change the group No., and the
group No. change screen is displayed.
2) Change the group No.
Use the keyboard to input the group No. to change.
3) Select the [OK] button.
Click the [OK] button after changing the group No.
If there is a duplicated group No., an error message is
displayed.
8.6.6 Interlocked setting (Step 5)
It is possible to confirm and change the information of ventilation unit interlocked with indoor unit
in each G-50A.
Confirm the ventilation unit interlocking set-up information.
[Procedure]
1) Select the No. of G-50 with “
/
” button.
In this case, select the No. of G-50A to confirm the ventilation unit interlocking set-up information
with the “
/
” button.
2) Select the [OK] button after confirming the ventilation unit interlocking information.
If it is not necessary to change or correct the information of each G-50A when it is checked, click
the [OK] button.
* When the [Cancel] button is clicked, this setting is terminated to return to the initial window.
Change the ventilation unit interlocking set-up information.
[Procedure]
1) Select the No. of G-50 with “
/
” button.
In this case, select the No. of G-50A to change the ventilation unit interlocking setting with the
“
/
” button.
2) Delete/add the unit icon.
Unit icon deletion:Click the unit icon to be deleted.
Unit icon addition:Click the unit icon to be added, from the Interlocking destination un-set unit
columns to set it to the selected state.
(The symbol of the selected unit is displayed by the pointer.)
When the interlocking ventilation unit display line to be added is clicked, the
unit icon is displayed.
Note:
•
This group setting screen displays the number of management groups and number of indoor units
for the system controller (GR, SR, AN, SC) limited when the group is newly organized.
• It is possible to use the group organization as it is, which is collected from the G-50A.
On/off controller (AN), etc., for instance
G-50A selection:
Select the G-50 No.
Interlocking
ventilation unit:
Displays the ventila-
tion unit (LC, FU) to
interlock.
Interlocking destination
un-set unit:
Displays the indoor unit (IC, AIC)
to which interlocking is not set.