Filter
Top Products
(Sewing preparation continued)
[] After attaching the sensor buttonhole foot, raise the foot
once°
Insert corner of fabric under the foot,.
Press the Up/dOwn needle position button twice°
Remove the fabric to the left to draw both threads under
the fool
Insert the garment under the foot, and lower the needle
at the starting poinL
Then lower the automatic buttonhole foot°
If there is a gap ®, it may cause an uneven buttonhole
stitch length as shown,
(_) Mark for placement of buttonhole
(Z)Starting point
® Slider
0 No gap
@ Spring holder
@ Uneven stitch results
[]
@
®
Starting to sew
After sewing the buttonhole stitch, the machine stops
automatically.
Sewing steps:
[] The buttonhole will be automatically sewn first: the
front backtack and left row_
[_ Next, the right row.
[_ Last the back bartack and locking stitch_
Raise the presser foot.
To sew another buttonhole, press BH1 key, then
depress the foot control. For buttonhole stitches
BH14, BH15, you can repeat sewing without
pressing keys. Raise the presser foot and lower the
foot again_
[]
°1
°i
I
[
SEN
RAISE
SEN
I
I
FOOT]
PRESS j
[BHI]KEY
_:--j
68