Filter
Top Products
Inserting the bobbin
[] Place a bobbin in the bobbin holder with the thread
running off counterclockwise_
O End of thread
[] Guide the thread into the notch (_ on the front side
of the bobbin holder. Draw the thread to the left,
sliding it between the tension spring blades,
(_ Notch @
Continue to draw the thread lightly until the thread
slips into the notch ®o Pull out about 6" (15 cm)
of thread.
(_) Notch ®
[] Attach the hook cover plate, Check the threading by
referring to the chart shown on the hook cover plate,
(_ Threading chart
[]
[]
[]
®
36