Kenmore 385.19365 Sewing Machine User Manual


 
Twin Needle Stitch
Q Stitch Pattern: 92
® Thread tension dial: AUTO
(_) F: Satin stitch foot
* Press the (_ Twin needle button°
This machine is equipped with a twin needle that can be
used to sew parallel rows straight on decorative stitches
adding an exquisite touch to table linens and clothing.
These stitch patterns (01, 04, 28, 3t, 32, 35, 40, 42, 51,
52, 54, 82, 92) can also be used. Turn off and unplug the
machine before changing the needle to the twin needle.
Insert the additional spool pin, and put the felt and spool on
it with the thread coming off the spool as shown.
When threading the machine for twin needle sewing follow
this chart making sure you separate the threads, placing
one in each thread guide on the needle bar.
Q ® ®
3-< =-=
92 {qUT0
Starting to sew
Threading steps from [1-7to [_ are the same as
Threading the machine.. (See page 38)
The additional spool thread should roll out clockwise as
shown.
[] Slide one of the threads through the needle bar
thread guide on the left and the other one on the
righL
[] Thread the needles from front to back.
[_ Turn the power switch on, select the stitch pattern
and press the twin needle stitch key.
At comers, raise the needles till they clear the fabric°
Partially raise the presser foot and carefully pivot the
fabric,.
When twin needle sewing is completed, change needle
and reset tension if necessary and press twin needle
key to disenagage twin needle function.
* The needle threader cannot be used with twin
needles.
[]
J
98