Filter
Top Products
Winding the Bobbin
Removing the bobbin
Gently slide the hook cover plate release button to the
right and remove the cover plate,.
Lift out the bobbin
O Hook cover plate release button
(_ Hook cover plate
......... J
o Setting up the bobbin winding
[] Lift up the spool pin O. Place the spool of thread on
the spool pin with the thread (_ coming off the spool
as shown_ Attach the large spool holder (_), and
press it firmly against the spool of thread.
[] Guide the thread around the thread guide_
[_ Thread through the hole in the bobbin from the
inside to the outside_ Put the bobbin on the bobbin
winder spindle.
o To use the additional spool pin
Set the Spoo! stand under the additional spool pin,
place the felt, then insert into the hole,
(_ Spool pin
Q Spool
(_ Large spool holder
(_ Additional spool pin
@ Felt
(_ Additional spqol pin hole
0 Bobbin winder spindle
[]
"h f
J _ ........
32