Filter
Top Products
Hook the thread through the slot CB_,and then pass the
thread through the thread guide plate and the looper
thread guide.
Thread guide plate
(_ Looper thread guide
%
Pass the thread through the hook on the front of the
looper thread take-up lever.
(_ Upper looper thread take-up lever
%
Pass the thread through upper looper thread guide.
Holding the end of the thread with a pair of tweezers,
pass it through the hole on the upper looper. Pull 4"
(10 cm) or more of thread through the hole to the back
of the machine.
Upper looper thread guide
Upper looper
%
®
To rethread the upper looper
(_ Lower looper thread
Upper looper
Turn the handwheel toward you until the upper looper
comes to the middle point of its travel, and unhook the
thread of the lower looper from the upper looper.
Thread the upper looper.
38