Filter
Top Products
SECTION II. GETTING READYTO SEW
Plug in the machine and switch on the power
(_ Power supply plug
Outlet
Plug connector
Power switch
(_) Machine plug
NOTE
Before inserting the plug into your machine, be sure the
power switch (_ is OFE
Insert the machine plug (_ into the three-prong plug
connector _, as shown. It will only fit one way.
Insert the power supply plug (_ into the wall outlet @.
Push the power switch _ to turn on the power and
sewing light.
Safety feature:
Your machine will not operate unless the power switch is
turned on. If you are interrupted or stop sewing, turn off
the power switch to prevent injury to children.
Operating Instructions:
This appliance has a polarized plug (one blade wider than
the other). To reduce the risk of electric shock, this plug is
intended tofit in a polarized outlet only one way. If the plug
does not fit in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.
Foot Controller Model YC-482P is used with
Serger Model 385.16655XXX.
XXX - represents numbers O0Othrough 999.
Foot control use
The foot control regulates the speed at which you sew.
To increase speed, gently press down with the ball of your
foot.
To decrease speed, release your foot pressure slightly.
NOTE
The foot control issensitive and will increase or decrease
your sewing speed immediately. Practice on a scrap of
fabric to regulate your sewing speed to your satisfaction.
/
%
\
\
\
@
\
\
\
,I
8