Filter
Top Products
f
Rethreading a broken thread
If one of the threads breaks:
Turn off the power switch and unplug the machine.
Raise the presser foot and pull the thread chain out to
the back of the presser foot, and cut the chain to
separate each of the threads.
(_ Cut off the tangled threads.
/
Re-thread the thread which had been broken.
Example: Re-thread the lower looper thread _.
Lower looper thread
f
Turn the handwheel toward you until the needle bar
comes to its highest position.
Needle bar
f
%
Pull out the needle threads above the needle plate.
Pull all threads to back of machine 4" (10 cm ).
Lower presser foot, turn handwheel toward you to chain
off 3 or 4 stitches. Plug in. Resume serging.
(_ Needle thread
Needle
Presser foot
Needle plate
%
®
28