Filter
Top Products
Removing the presser foot
(_ Presser foot lifter
Needle
Lever
Foot holder
Turn off the power switch and unplug the machine.
Raise the needle and presser foot.
Press the lever _ located on the back of the foot holder _.
The presser foot witl drop off.
Attaching the presser foot
(_ Lever
Groove
Pin
Turn off the power switch and unplug the machine.
Place the presser foot so that the pin _ on the foot lies
just under the groove of the foot holder _. Lower the
foot holder to lock the foot in place.
Raise the presser foot lifter to check that the presser
foot is secure.
l. _. t.q ,__ i _4
t==_. =. Lr- • '/
To disengage the upper knife
(_ Upper knife release knob
Upper knife
Turn off the power switch and unplug the machine.
Open the looper and side covers.
Pull out the upper knife release knob (_ and slide it
down along the guide until comes to its lowest position.
Turn the handwheet to check if the upper knife _ is
deactivated.
\
\
\
\
A,,'\
To engage the upper knife
(_ Upper knife release knob
Upper knife
Turn off the power switch and unplug the machine.
Open the looper and side covers.
Pull out the upper knife release knob _ and slide it up
along the guide until it comes to its highest position.
Turn the handwheel to check if the upper knife _ is
engaged.
\
\
\
t
18