Filter
Top Products
m Fold over the length of the garment fabric, sew back
and forth beside the original seam to secure flaps of
the patch.
r Wrong side of garment fabric
t Sew back and forth
r
m
t
q
,
r
w
e
.
r
t
y
⁄0
t
⁄1
y
t
⁄2
y
y
⁄3
, Fold over the end of fabric and sew back and forth
three times over the triangular end.
q Wrong side of patch
w Right side of garment fabric
r Wrong side of garment fabric
. The patch should be cut 1 to 1.5 cm (7/16˝ – 5/8˝)
away from the hole. The corners should be cut
rounded off as shown.
e Right side of patch
r Wrong side of garment fabric
⁄0 Place the facing on the wrong side of the garment
fabric. Mark the 4 corners with pins as shown.
t Facing
y Garment fabric
⁄1 Turn all the layers over and cut the buttonhole opening
on the facing in the same way as step x.
Four marker pins show you the corner points on the
facing. Fold back each flap between the facing and
patch.
t Facing
y Garment fabric
⁄2 Stitch around the opening with a needle and thread as
shown.
t Facing
y Garment fabric
⁄3 The welted buttonhole is complete.
y Garment fabric
52