Janome 15000 Sewing Machine User Manual


 
121
Stitch back/forward keys
Press the “–” key q to move the hoop back to a previous
sewing point.
Press the “+” key w to move the hoop ahead.
The hoop will move one stitch each time the key is
pressed. Hold down the key to travel faster and jump 10,
100 or 500 stitches at a time. The stitch count e and the
total number of stitch count r are displayed in the stitch
count window.
You can use these keys to move the embroidery hoop to
where the thread has broken or run out.
q Stitch back key
w Stitch forward key
e Stitch count
r Total number of stitch count
The pale blue bar in the stitch count window is the
progress bar. The progress bar t appears when the
stitch count increases, and indicates the progress of
the embroidery sewing project. When the project is
completed, the progress bar returns to 0.
t Progress bar
Cross key
Press the cross key y to display the current sewing point
as a cross mark u. Press the cross key again to hide the
cross mark.
y Cross key
u Cross mark (Current sewing point)
Color section key
Press this key i to show the complete image of the
selected design or partial image of each color section
only.
To view the next color section, press the next color
section key !0.
To view the previous color section, press the previous
color section key o.
You can sew only the specific color section by pressing
the next color section key !0 until the desired section is
displayed.
i Color section key
o Previous color section key
!0 Next color section key
q w
!0
!1
!2
i
e r
y
u
t
Color list key
Press this key to view a list of thread colors employed in
the selected design.
!1 Color list key
Jogkeys
Adjust the hoop position with the jog keys so that the
needle position comes right above the center of the
reference lines on the fabric.
!2 Jog keys
o