Filter
Top Products
107
Attaching the Embroidery Foot
Use the embroidery foot P for embroidery.
z Turn the power switch on.
Raise the needle by pressing the needle up/down
button.
Press the lockout key and raise the presser foot with
the presser foot lifter.
q Lockout key
w Presser foot lifter
w
t
q
e
r
x Loosen the thumbscrew with the screwdriver and
remove the foot holder.
e Thumbscrew
r Foot holder
c Attach the embroidery foot P to the presser bar from
behind. Tighten the thumbscrew partially by hand.
t Embroidery foot P
v Lower the foot with the presser foot lifter.
Tighten the thumbscrew securely with the screwdriver.
z
x
c
v