152
CUSTOMIZING EMBROIDERY MODE
SETTINGS
Embroidery Mode Settings
Press the embroidery setting mode key (refer to page 92).
q
Auto thread tension
The auto thread tension level can be adjusted with
the“+”or“–”key.Increasethevaluewhenusingthesame
threads on the bobbin and needle.
w
Low bobbin thread warning
The low bobbin thread warning level can be adjusted with
the “+” or “–” key. To turn this option off, press the “–” key
until “OFF” shows in the window.
e
One stitch stop on/off
When this function is turned on, the machine sews one
stitch and stops automatically so that you can bring the
bobbin thread up before sewing.
r
Hoop confirmation on/off
The hoop confirmation message will appear every time
before opening the ready to sew window. However you
can turn this option off by selecting off.
Press the next page key to go to the next menu.
t
Maximum embroidery speed
The maximum embroidery sewing speed can be set from
400 to 1000 spm in 100 spm intervals by pressing the “+”
or “–” key. (Sewing speed can be varied with the speed
control slider even while running the machine.)
NOTE:
Reduce the sewing speed when sewing patterns
with narrow zigzag stitches that tend to warp at high
speeds.
y
Embroidery foot height
The machine measures fabric thickness and automatically
sets the presser foot to the optimum height.
However, you can fine tune the foot height according to
fabric material and/or other sewing conditions by pressing
the “+” or “–” key. The adjustable range is 0 mm to 4 mm.
Press the next page key to go to the next menu.
u
Consecutive color grouping on/off
Ifanimportedstitchdataleordesignlesofapattern
combination contain consecutive sections in the same
color, these sections are automatically grouped together
as one section when opening the file or saving the
pattern combination as a file or going to the ready to sew
window. This function is invalid when combining the built-
in designs and externally sourced designs.
Turn this option off if you do not wish to group the
sections together.
q
w
e
r
t
y
u