Filter
Top Products
112
b Clamp the fabric to the hoop with the short magnetic
clamps when using hoop SQ23 or hoop GR.
Use the long magnetic clamps when using hoop
ASQ22.
i Magnetic clamp (short)
NOTE:
Thick layers of fabric and stabilizer may cause
skipped stitches, or broken threads and needles.
Avoid sewing on the layers thicker than 3 mm (1/8˝).
v Push the inner hoop and fabric into the outer hoop.
Tighten the screw on the outer hoop to stretch the
fabric. Make sure that the fabric is stretched tightly in
the hoop.
Remove the template.
NOTE:
Make sure to match the alignment marks of the outer
and inner hoops when stretching the fabric.
u Alignment marks
Setting the Fabric in an Embroidery Hoop
z Prepare a fabric and attach a stabilizer to the wrong
side of the fabric.
The fabric and stabilizer should be larger than the
hoop size.
Draw the centerlines on the fabric with tailor’s chalk.
q Fabric
w Centerlines
x Lay the inner hoop and template on the fabric,
matching the centerlines of the fabric with the
template.
eInnerhoop
r Template
q
w
r
e
t
y
u
i
c Loosen the hoop tightening screw on the outer hoop.
Place the inner hoop and fabric on the outer hoop.
t Hoop tightening screw
y Outer hoop
z
x
c
v
b