Janome 15000 Sewing Machine User Manual


 
Stitch balance of the stretch buttonhole (B10)
The stitch balance of the right and left rows of the stretch
buttonhole may vary depending on sewing conditions.
If the stitches are not balanced, correct the unevenness
with the feed balancing dial.
If the right row is denser, turn the dial in the direction
of “+”.
If the left row is denser, turn the dial in the direction
of “–”.
NOTE:
Return the feed balancing dial to the neutral position
and attach the cap when sewing is finished.
Correcting Deformed Stitch Patterns
The sewing results of the stretch stitch patterns may vary
depending upon the sewing conditions, such as sewing
speed, type of the fabric, number of layers etc.
Always test sew on a scrap piece of the fabric that you
wish to use.
If decorative stitch patterns, letters, numbers or the
manual buttonhole stitch are deformed, correct them with
the feed balancing dial.
Remove the cap with your finger.
q Cap
NOTE:
In normal sewing, set the feed balancing dial to the
neutral position, i.e. the groove on the dial is centered
with the standard setting mark.
(+)
(+)
(+)
(–)
(–)
(–)
Decorative stretch stitch patterns
If the pattern is compressed, turn the dial in the direction
of “+”.
If the pattern is drawn out, turn the dial in the direction of
“–”.
Letters and numbers
If the pattern is compressed, turn the dial in the direction
of “+”.
If the pattern is drawn out, turn the dial in the direction of
“–”.
q
Language Selection Mode
Select the desired language and press the OK key.
The visual touch screen shows messages in the selected
language.
103