Janome 15000 Sewing Machine User Manual


 
c Put the bobbin on the bobbin winder spindle.
r Bobbin
t Bobbin winder spindle
v Pass the thread to the bobbin.
Hold the thread with both hands and wind it around
the bobbin clockwise several times.
b Insert the thread into one of the slits u of the flange
plate y and pull the thread to cut.
y Flange plate
u Slit
n Push the bobbin stopper i to the left.
i Bobbin stopper
m Press the bobbin winding button o. The visual touch
screen will show the bobbin winding sign.
o Bobbin winding button
When the bobbin is fully wound, it will stop spinning
and the bobbin stopper returns to its original position
automatically.
, Remove the bobbin. Cut the thread with bobbin thread
cutter B !0.
! 0 Bobbin thread cutter B
NOTE:
For safety purposes, the machine will automatically
stop 1.5 minutes after starting bobbin winding.
q
z
r
x
c
b
m ,
w
e
q
w
e
Winding the bobbin
z Pull the thread from the spool.
Hold the thread with both hands and pass the thread
into the guide slot q.
q Guide slot
x Draw the thread to the left and forward around the
thread guide w.
Draw the thread to the rear and to the right around
and under the guide plate e.
Firmly pull the thread to the right while holding it with
both hands.
w Thread guide
e Guide plate
y
u
t
v
n
NOTE:
You can adjust the bobbin winding speed in the
setting mode (refer to page 96).
i
!0
o
13