Filter
Top Products
113
Attaching the Embroidery Hoop to the Machine
z Turn the power switch on and open the carriage arm.
Press the mode switch key and a warning message
will appear.
Press the OK key and the carriage will move to the
starting position.
The visual touch screen will display the embroidery
mode window.
q Mode switch key
w
e
r
NOTE:
Ifyoupressthemodeswitchkeywiththecarriage
arm retracted, a confirmation message will appear.
DonotpresstheOKkeyorXkey.Instead,openthe
carriage arm.
x Place the hoop on the machine and attach the hoop to
the carriage by inserting the lock pin of the hoop into
the hole in the carriage.
Turn the knob clockwise to secure the hoop.
w Lock pin
e Hole
Thread Holder
To avoid sewing over a tail of the needle thread, place
the thread end on the thread holder.
r Thread holder
Pass the needle thread through the hole in the
embroidery foot and draw it up to the thread holder.
Hang the thread on the thread holder from front to back.
q
z
x