Janome 15000 Sewing Machine User Manual


 
108
c Push down on the mark of the needle plate until it
locks in place.
Make sure the warning message disappears and the
straight stitch is automatically selected.
Turn the hand wheel slowly and make sure that the
needle does not hit the needle plate.
Press the unlock key to unlock.
CAUTION:
Never press the needle plate release lever while
running the machine.
r
e
q
Attaching the Straight Stitch Needle Plate
Use the straight stitch needle plate for embroidery.
CAUTION:
Always make sure to press the lockout key to lockout
the machine before replacing the needle plate.
z Raise the needle and press the lockout key.
Press the presser foot lifter button to raise the presser
foot.
Slide the extension table to the left to remove it.
Push down the needle plate release lever and the
needle plate will snap off.
A message will appear warning that the needle plate
is not secured.
Remove the needle plate to the right.
q Lockout key
w Unlock key
e Presser foot lifter button
r Needle plate release lever
x Place the straight stitch needle plate on the machine.
Set the left edge of the needle plate into the opening.
z
x
c
w