Filter
Top Products
60
5 Press the Start/Stop Button to sew the
buttonhole. The buttonhole will be
automatically sewn in a single step.
To repeat buttonhole sewing
To sew another buttonhole, raise the presser
foot and move the fabric to where the next
buttonhole is sewn, then lower the foot and
start the machine.
6When buttonhole sewing is finished, push
the buttonhole lever upward as far as it will
go.
7 Remove the fabric and place a pin just
below the bartack at each end to prevent
accidentally cutting bartacks.
Cut the opening with the Seam Ripper.
Use an Eyelet Puncher
to open a
keyhole buttonhole.
10
Seam Ripper
11
Eyelet Puncher
Completed.
Raise Presser Foot.
R
Sensor BH
Now sewing.
Auto
5
6
7
Step 1 Step 2
Step 3
Step 1: The machine will sew the front
bartack and the left row first.
Then it goes back to the starting
point with straight stitch.
Step 2: The machine will sew the right row.
Step 3: The machine will sew the back
bartack, and the machine will stop
automatically.
10
11