Filter
Top Products
11
5
Threading for Bobbin Winding
Hold the upper thread with both hands and
place it downward into the Slit.
Guide the thread around the Thread Guide
following the dashed blue line as shown in
the diagram.
1Slit
2 Thread Guide
Thread through the hole in the Bobbin from
the inside to the outside.
Put the Bobbin on the Bobbin Winder
Spindle, and push it to the right.
3 Bobbin
4Bobbin Winder Spindle
The Visual Touch Screen shows “Bobbin
Winding”.
Hold the free end of the thread in your hand
and depress the foot control.
Stop the machine after a few rotations have
been made, and cut the thread close to the
hole in the Bobbin.
Depress the Foot Control again. When the
Bobbin is fully wound, it will stop
automatically.
Release the Foot Control and return the
Bobbin Winder Spindle to its original position
by moving the spindle to the left, and cut the
thread with the Bobbin Thread Cutter as
shown.
5Bobbin Thread Cutter
NOTES:
• The machine will not sew until the
spindle has been returned to the left
position.
• You can use either the Foot Control or
the Start/Stop Button to wind the
Bobbin.
• The motor will stop automatically
when the Bobbin is fully wound even if
the Foot Control is still being depressed
or if the Start/Stop Button has not been
pressed again, in order to prevent any
malfunction.
2
3
1
4