Filter
Top Products
28
Ordinary
Sewing
Embroidery
E
Register
Common
Set
Auto Tension
Free Arm Length
Feed Dog
2
Auto
Remaining Bobbin Thread
Ordinary Sewing Mode Setting
In this mode you can set the following sewing
functions:
1
Auto Tension
The Auto Thread Tension level can be
adjusted.
Tension level can be set from – 5 to + 5.
Changes are made in increments of 1 and the
default setting is 0 (Auto).
Press the key, to set the tension level
higher.
Press the key, to set the tension level
lower.
2
Remaining Bobbin Thread
The Visual Touch Screen will display “Bobbin
Thread almost out” when the bobbin thread is
running low. The Thread Sensor detects the
remaining amount of thread in the bobbin.
It has 5 adjustable steps, 0 to 4.
Press key to increase thread amount level
for the warning message to be displayed.
Press key to decrease thread amount
level for the warning message to be displayed.
NOTE:
• This is an approximate guide to setting the
bobbin thread sensor.
3
Feed Dog
You can drop or raise feed dog by pressing the
key or the key.
4
Free Arm Length
The carriage will move allowing you to use the
full length of the Free Arm, when you press
key.
Press key to return the carriage to its
home position.
5
Page Key
You can turn the pages by pressing the Page
keys.
6 Register key
Press this key to register the settings and
return to the previous screen.
7 Return key
Press this key to return to the previous screen
without registering the settings.
1
2
3
4
5
7
6