Filter
Top Products
40
Basting Stitch
The Basting Stitch is used to hold fabric
layers together during fitting. Use a fine
needle so as not to leave permanent needle
marks on fabrics.
Press Pattern 7 on the Visual Touch Screen.
The feed dog will drop automatically by
selecting the Basting Stitch.
Attach Basting/Darning Foot P-2.
Draw both needle and bobbin threads to the
back.
Depress the Foot Control. The machine will
take one stitch and stop automatically.
Release the Foot Control.
Hold the fabric taut and slide it to where you
want the next stitch.
Continue in this manner sliding the fabric
sideways or forward.
NOTES:
• When basting is completed, replace the
Foot Holder.
• The feed dog will rise automatically
when selecting other stitches.
Basting/Darning Foot P-2
To attach:
Loosen the thumbscrew and remove the
Foot Holder.
Attach the Basting/Darning Foot P-2 to the
presser bar putting the Pin on the Needle
Clamp Screw.
Tighten the thumbscrew firmly with the
screwdriver.
1 Basting/Darning Foot P-2
2Pin
3 Needle Clamp Screw
1
3
2