Filter
Top Products
144
In addition to the built-in embroidery designs,
there are many attractive designs available
from the optional PC Design Card.
The Memory Craft 10001 is compatible with the
ATA PC Card, which can be used to save the
ordinary and embroidery stitch files.
Inserting the PC Card
Insert the PC Card into the slot with the Front
Side of Card facing to you.
Push the card until it clicks, then the Eject
Button will pop out.
1 Front Side of Card
When the card is properly set, the Red Bar on
the Eject Button will show up.
2 Eject Button
3 Red Bar
Ejecting the PC Card
Press the Eject Button to eject the PC Card.
Take out the PC Card from the machine.
CAUTION:
Do not turn the power off or eject the card while
the hourglass or warning sign has
been displayed on the screen.
Otherwise the saved data will lost or the
memory will be damaged.
ATA PC Card
The ATA PC Card consists from an adapter and
Compact Flash available from computer shops
and camera shops.
NOTE:
The following Compact Flashes are
recommended for use with the Memory
Craft 10001.
• Sandisk (8 MB, 16 MB, 20 MB)
• Buffalo RCF-C (30 MB), RCF-L (16 MB)
• Kodak (16 MB)
• Lexar (16 MB, 8x/4x)
• TDK (16 MB)
• Pretec (16 MB)
•Microtec (16 MB)
PC Card (Optional Item)
1
2
3
2
2