Filter
Top Products
WIRELESS NETWORK IP CAMERA User’s Guide
61
E. Updating Firmware
Identify the Version of Firmware
You can identify the version of Wireless Network IP Camera’s Firmware on the System
Configuration Page. It is also displayed on the camera's login page.
(You may check the version of your Wireless Network IP Camera firmware first and then update if
necessary.)
Follow these steps to check the installed version of firmware
① Connect to your Wireless Network IP Camera home page.
② Click “Administrator Menus.”
③ Move to System Configuration Page and check the version of firmware.
Download New Firmware
You can download the latest firmware over the Internet at the INTELLINET ACTIVE
NETWORKING website: www.intellinet-network.com/ipcamera
.
CAUTION
The process to update the current firmware is already installed into your Wireless Network IP Camera
Follow the instruction in this manual. During the process, do not expose the camera to physical shock
nor disconnect network and power. Otherwise, your Wireless Network IP Camera can be damaged
seriously, which may result improper operation or failure.
If you are unable to update the firmware or the Wireless Network IP Camera does not operate properly
after updating, please contact your dealer.