Filter
Top Products
WIRELESS NETWORK IP CAMERA User’s Guide
19
Assigning IP Address
Follow these steps to assign an IP address using Hyper Terminal
1. Execute “Hyper Terminal” on your PC
2. Connect an RS232 Cable to the serial port of the PC that you have selected in Chapter 4.3.1 -
Configuring Hyper Terminal and the Wireless Network IP Camera serial port while Hyper
Terminal is executed.
3.
Supply power to the Wireless Network IP Camera.
4. A count down will start with the message “Press any key to stop auto-boot.”
5. Press any key. “Boot” prompt should appear as below.