Intellinet Network Solutions 550703 Home Security System User Manual


 
WIRELESS NETWORK IP CAMERA User’s Guide
47
Time Configuration
This screen is used to configure date and time.
1. Synchronized with NTP server
The Wireless Network IP Camera automatically configures date and time through the NTP
(Network Time Protocol) server. The NTP Server is based on Greenwich time. Select NTP
server, IP address and Time Zone to set the date and time automatically, then press SUBMIT. It
may not work due to the possible network error; in this case, you can select other NTP server
and IP address or you can set the date and time manually. Once date and time are set,, you don’t
have to reconfigure when connecting to the Wireless Network IP Camera.
The "Update Interval" tells the camera how often to contact the NTP Server to resync the
internal clock. For time critical applications the update interval can be set from 1 minute to
2880 minutes (= 2 days).
Free NTP Servers can be found at: http://www.ntp.org/.
2. Set manually
Enter the date and time manually, then click SUBMIT.
3. Enable Daylight Savings
This is to configure for Daylight Savings Time.