Filter
Top Products
WIRELESS NETWORK IP CAMERA User’s Guide
49
4. Direct public access to image via HTTP
The camera supports a method to access the live image directly without logging in to the camera.
The URL is: http://camera_ip/jpg/image.jpg.
If direct public access is enabled, the image can be accessed without entering username and
password. If direct public access is disabled, a valid username and password must be provided.
This feature is important for users who wish to use the camera in 3
rd
party video monitoring
applications as it turns your Network IP Camera into a "JPG Compatible Camera".
5. Image file name (maximum length 10 characters)
Set the image file name for the public access feature.
Example1 – Public Access is enabled: http://192.168.1.221/jpg/image.jpg
Example2 – Public Access is disabled: http://guest:guest@192.168.1.221/jpg/image.jpg
*
* MSIE does not support this type of command any longer due to a recent security upgrade by
Microsoft.
6. System information
This is to check system information for Wireless Network IP Camera. You may see the model
name, serial no., Mac address of Ethernet and WLAN Adapter, Bootrom & Firmware version.
(Please refer to Appendix E,. Updating Firmware.).
7. Reboot
This function allows you to reboot the camera via your web browser.
8. Restore Defaults
This functions allows you to restore the camera's factory default settings via your web browser.
After the function has been performed, all settings are reverted to the original settings (including
the IP Address, which is set to 192.168.1.221).