Filter
Top Products
WIRELESS NETWORK IP CAMERA User’s Guide
48
System Configuration
This screen is used to configure camera name, location and public image access. It also lets you
remotely restart the camera and restore the factory default values.
1. Camera name
This is to configure camera name for the front-page view. Camera name should be limited to 15
bytes, which are equal to 15 English characters.
2. Camera location
This is to configure camera location for the front-page view
. Camera location should be limited
to 30 bytes, which are equal to 30 English characters.
3. Supply voltage to output port option
This option is to supply voltage to the Wireless Network IP Camera’s output port.
Just click “supply” to supply voltage to control the PTZ devices.