Filter
Top Products
WIRELESS NETWORK IP CAMERA User’s Guide
45
⑤ Append to the image file name
You may append some information to the Image file name
A.
Camera IP address : Example: “file name _192.168.1.19”.JPG
B. Date and time : Example: “file name_20020218150030.”JPG
C. Trigger condition flag
1. If choosing “Activation of digital input port”, “D” may be appended to image file name.
Example: “file name_D.”JPG
In case of choosing “Periodically every…”, “P” is appended to image file name.
Example: “file name_P”.JPG
D. Image sequence number
If you select this option, you may classify the file that has same extend name.
Consecutive numbers are from “000” to “999”
Example: When you designate the file name as “camera” and select “Image sequence
number,”the file name appears “ camera001.JPG, camera002.JPG ….camera999.JPG”
Image capture option limitation
Configuration for image capture option affects memory capacity. If you configure this option to
excess memory size, the Warning message “Not enough memory…” appears.
The total image capture frame rate must be limited 45 fps due to memory size.
(Before event time + After event time) x Image capture frame rate must be less than 45.
For example, if you configure “Before event time” as 3 seconds, “After event time” as 2 seconds
and “image capture frame” as 3 fps, the total image capture frame rate is ( 3 + 2) x 3 = 15 fps.