Intellinet Network Solutions 550703 Home Security System User Manual


 
WIRELESS NETWORK IP CAMERA User’s Guide
43
Event Trigger Configuration
This screen is used to designate an e-mail address or FTP server to receive captured images by
setting SMTP or FTP settings. You may connect external devices such as an infrared sensor or alarm
sensor to use with the provided terminal block (please refer to Appendix F – The I/O Connector).
1. Trigger Condition
This is to select option how to send an event signal to theWireless Network IP Camera.
Activation of digital input port
The Wireless Network IP Camera receives an event signal from an external device such as an
infrared sensor, alarm sensor, etc.. The trigger condition defines the the "active" state of the
IO Port.