Filter
Top Products
WIRELESS NETWORK IP CAMERA User’s Guide
30
Replacing the Lens
Because the Wireless Network IP Camera is designed with a CS-Mount, the lens supplied with
your product can be replaced with any standard C or CS lens typically used within the
surveillance industry.
Follow the instructions below to replace the supplied lens with any C or CS type lens:
1. Unscrew the Wireless Network IP Camera lens by turning the lens counter-clockwise
2. C-lens only: Attach the new lens to a C-CS adapter
3. Screw the new lens onto the Wireless Network IP Camera. If applicable, adjust the iris
according to the prevailing light conditions.
4. Refer to Adjusting the Focus on page 29.
5. Reload your Web browser and monitor the results from the product Home Page.